Before
Existing kitchen sink area before replacement work.
Kitchen Sink and Tap Installation
Replacing a kitchen sink or tap is not always a simple swap. The new fitting may have different connections, a deeper bowl, a different waste position or a larger cut-out requirement.
REZ Heating & Plumbing Services installs kitchen taps, sinks, wastes and under-sink pipework across Colchester, Essex and Suffolk.
Helpful guidance
Kitchen tap replacement
A like-for-like tap replacement is normally straightforward when:
- The isolation valves work
- The existing tap hole is suitable
- The new tap tails reach the supplies
- Access beneath the sink is reasonable
- The worktop and sink are in good condition
Additional work may be needed if the old tap is seized, the isolation valves do not close, the supplies are an unusual size or the tap is difficult to reach behind a deep sink bowl.
Kitchen sink replacement
Important checks include:
- Overall sink dimensions
- The size of the existing worktop cut-out
- Bowl depth
- Waste and overflow positions
- Cabinet space underneath
- Clearance for appliances or drawers
- Sink clips and sealing surface
- Whether the existing waste route can be reused
A sink described as the same nominal size can still require worktop alterations.
Waste kits and basket strainers
Common issues include:
- Loose basket strainer seals
- Perished washers
- Poorly aligned waste kits
- Flexible waste pipes holding debris
- Leaking overflow connections
- Traps with insufficient space or fall
- Appliance hoses connected badly
A correctly assembled waste should be accessible, properly supported and tested after installation.
Isolation valves and under-sink plumbing
Under-sink pipework should be arranged so that:
- Valves remain reachable
- The trap can be removed for cleaning
- Appliance hoses are not kinked
- The cabinet can still be used
- Joints are not under unnecessary strain
Real work examples
Recent kitchen sink and tap work
These are genuine examples of completed kitchen sink and tap work carried out by REZ Heating & Plumbing Services across Colchester, Essex and Suffolk.
Before, during, after
Clear project stages
Before and after examples are shown only where the project photos clearly support a fair comparison.
After
Finished sink and tap area after the visible work was completed.
Related services
Related plumbing services
These related services can help if your plumbing issue involves more than one part of the system.
FAQs
Questions customers often ask before booking
Can you fit a tap that I have already purchased?
Yes, provided it is suitable for the sink, available pressure and existing connections.
Does a new sink always fit the existing worktop opening?
No. Even sinks with similar dimensions may have different templates or bowl shapes. The worktop opening should be checked before installation.
Should the isolation valves be replaced at the same time?
If they are seized, leaking or inaccessible, replacing them during the job can prevent difficulty during future maintenance.
Can you fix a leak under the sink without replacing everything?
Usually, yes. Many leaks are caused by a single washer, trap, waste connection or loose joint.
Ask Rez for practical advice
Need a new kitchen sink or tap fitted?
Send photos of the sink, the cupboard underneath, the existing pipework and the new product details.
Call, WhatsApp photos or request a quote when you are ready.